I.D.P.

  • SOLVES PROBLEMS OF STAINS,EFFLORESCENCE IDP B&A

     WATERMARKS AND EFFLORESCENCE

  • PREVENTS SPOILING OF INTERNAL DECORATIONS

  • DRY WITHIN AN HOUR

  • SOLVENT FREE

 

I.D.P – Water based mica coating

IDP is for use on interior wall or ceiling surfaces, including plaster, plasterboard and concrete, with stains and/or efflorescence salts to eliminate stains and watermarks caused by penetrating damp, leaks and bursts.  Approximately 10 square metres per litre coverage, depending on surface to be treated. Apply with a brush – Must not be used externally. Note: I.D.P is not a substitute for structural repairs, an alternative to a d.p.c., or for use below ground. I.D.P prevents water stains and discolouration arising from bursts, leaks and floods, as well as leaching of difficult stains, e.g. nicotine, lime wash and smoke damage, prevents staining on chimney breasts and damage from minor patches of rising and penetrating damp.  I.D.P acts as a vapour barrier preventing interstitial condensation occurring behind dry lining and insulation boards and also prevents rust and tobacco stains bleeding through paint work.

Remove all loose flaking paint, friable material and evidence of salts. Stir the I.D.P. well and apply one liberal coat by brush extending treatment 150mm (6″) beyond visible signs of stains or salts. Apply neat DO NOT DILUTE. Apply I.D.P. in one direction DO NOT CROSS BRUSH. A second coat should be applied to areas of heavy staining. Apply second coat only when the first coat is thoroughly dry. Redecorate when the I.D.P. is thoroughly dry.

DESCRIPTION

Composition: Aqueous solution of synthetic polymer emulsions, inorganic fillers, mica and resins.
Appearance: Green/Grey waterborne emulsion.
Performance: I.D.P. is a mica based coating which stops the manifestation of salts and discolouration caused by water percolating through the fabric of a building, including minor patches of rising or penetrating damp, and staining from soot, nicotine, smoke and rust.
Areas of Use: Any wall or ceiling surface, including plaster, plasterboard and concrete, with stains and/or efflorescence salts.
Coverage: Approximately 10 square metres per litre, depending on surface to be treated.
Availability: Supplied in 2.5 litre and 5 litre tins only.
Application & Storage: Brush apply only. Must not be used externally. Protect from frost. Store in a dry location out of direct sunlight. I.D.P. should not be allowed to contaminate waterways, drains or sewers.
Note: I.D.P is not a substitute for structural repairs, an alternative to a d.p.c., or for use below ground.

BENEFITS

PREVENTS water stains and discolouration arising from bursts, leaks and floods. PREVENTS interstitial condensation on cold bridges, e.g. concrete beams, ring beams and concrete gutters.
PREVENTS efflorescence caused by rising damp and water penetration. PREVENTS leaching of difficult stains, e.g. nicotine, lime wash/distemper and smoke damage.
PREVENTS staining on chimney breasts from interstitial condensation, leaching soot and water. PREVENTS damage from minor patches of rising and penetrating damp.
PREVENTS interstitial condensation occurring behind dry lining and insulation boards – acts as a vapour barrier PREVENTS rust and tobacco stains bleeding through paint work.

Pack size: 2.5 litres

I-D-P PACK SHOT-s

For Trade purchase please call our Sales Office Number 020 8337 0731

For DIY purchase please call our FREEPHONE Number 0800 285 1624

Accreditations