We’re open 9:00am - 5:00pm Mon-Fri
MOULD ERADICATION KIT
The MOULD ERADICATION KIT is designed for mild to moderate outbreaks of mould and was developed specifically for homeowners and tenants to use. It has been successfully used throughout the UK for over 30 years by amateurs and also supplied by Local Authorities and Housing Associations to their tenants for totally eradicating mould problems on walls and ceilings.
Each Kit contains 200 mls of RLT BACTDET 05, 200 mls of RLT HALOPHEN, 2 x MGC FUNGICIDAL ADDITIVES, a mixing bucket, sponge, gloves, goggles and a brush – everything needed to treat a mould problem on walls, ceilings and window reveals. There are sufficient materials in the Kit to treat 10-12 square metres of infected surfaces and full application instructions are included in the box as well as printed on the bottles.
RLT BACTDET 05, RLT HALOPHEN and the MGC FUNGICIDAL ADDITIVES are approved under COPR 1986 (as amended) by the Health & Safety Executive (HSE) for both amateur and professional use.This Kit contains the following:
1 x RLT BACTDET 05 200 mls.
1 x RLT HALOPHEN 200 mls.
2 x MGC FUNGICIDAL ADDITIVES 50 mls.
1 x PAIR OF GLOVES
1 x SAFETY GOGGLES
1 x PAINT BRUSH
1 x CLEANING SPONGE
1 x MIXING BUCKET
For instructions on how to apply, see our videos here
STEP BY STEP APPLICATION INSTRUCTIONS
Also watch the video to see the Kit demonstrated.
For dealing with MOULD GROWTH on walls, ceilings, window reveals, window frames, doors, skirting boards, etc.
STAGE 1: Use the RLT BACTDET 05 to eradicate and remove surface mould before preparation work.
Areas to be treated: Treat the whole area where mould can be seen. Extend the treatment one metre (3ft) beyond the infected area in all directions on the walls or ceilings. Carpets should be lifted, especially fitted carpets and the flooring cleaned using the RLT BACTDET 05.
Directions: Empty the RLT BACTDET 05 into the container and make up to one litre with warm water. Take the sponge or a cleaning cloth or brush and wash off the mould.
Wallpaper surfaces must be washed prior to stripping. After wallpaper has been removed wash infected area again. All wallpaper removed should be bagged, sealed and taken from the premises immediately. Allow surface to dry before proceeding.
PREPARATION: Prepare surfaces, scrape off all loose or flaking paint and rub down. Previously painted surfaces must be etched using sandpaper or similar, before proceeding to Stage 2.
STAGE 2: Use the RLT HALOPHEN to sterilise and protect the surface.
Areas to be treated: Treat all areas of wall and ceiling surfaces where RLT BACTDET 05 has been used.
Directions: Empty RLT HALOPHEN into the container and make up to one litre with water and apply to the dry wall and ceiling surfaces. Apply using the brush provided and allow to dry before decorating.
STAGE 3: MGC FUNGICIDAL ADDITIVES are specially formulated to protect the decoration from mould attack. They can be incorporated into Emulsion Paint, Primers, Undercoats and Gloss Paint, plus Wallpaper Paste, Size, Textured Paints and Grout.
Directions: Add the contents of one MGC FUNGICIDAL ADDITIVE to each 2½ litres of Emulsion Paint, Wallpaper Paste or Size.
Add the contents of one MGC FUNGICIDAL ADDITIVE to each 5 litres of Primer, Undercoat or Gloss Finish.
Thoroughly stir materials after adding contents of MGC FUNGICIDAL ADDITIVE.
Alternatively use BIOCHECK EMULSION – available in Matt or Silk Finish - on walls and ceilings and BIOCHECK WATER-BASED GLOSS on woodwork, metalwork, etc., these decorative finishes are specially formulated to resist mould. Full details on both these products are available on request.
IMPORTANT: Mould often results from condensation. To lessen the problem ensure adequate ventilation, preferably from a point near the source of the moisture, especially in kitchens and bathrooms.
In severe or persistent cases of mould other methods of treatment may be required and these are available on request.
Coverage: Not to exceed 10-12 square metres per diluted litre
If you require help or assistance with your order including for special colours in Biocheck Matt or Silk Emulsions and Biocheck Allweather please contact our sales office which is open Monday to Friday 9.00 am – 5.00 pm
Telephone: 01372 743334
Fax: 01372 720856
Mould Growth Consultants Limited
Longmead Business Centre
We will aim to process your order for despatch to you between 1-5 working days of confirming acceptance of your order. Consequently, even if you cancel your order shortly after placing it, it is possible that we may be unable to prevent goods you have ordered being despatched to you and you may then need to return them to us at your cost.
When you order your Goods, we will wherever possible, give you an indication of the day of delivery, normally 2-5 working days after confirming acceptance of your order.
Deliveries will be made by post/a carrier instructed by us to the address stipulated in your order. You must ensure that someone is present to accept delivery.
While a delivery date will be prearranged with you, please remember that it is generally not possible to contact the delivery driver once he has left the depot. As a signature is required on delivery, if you will not be at home to take the delivery, a signed note instructing the driver where to leave the goods is acceptable. Otherwise a re-delivery charge will be incurred.
Cancellation of Order
If you bought the Goods as a Consumer, you may cancel your order at any time before we despatch your order or before the expiry of 7 working days from the date you receive your order, not including the day you received it.
As required by the Distance Selling Regulations, details of our after-sales service and guarantees, if any, are given on our website.
If you cancel before we have sent the Goods, we will refund to you the price of the Goods and the cost of delivery, if any.
Our most important task is to ensure your absolute satisfaction. We will always strive to reach that target. However, we acknowledge that mistakes are made occasionally. This paragraph covers that possibility. If you are not wholly satisfied with the product, please tell us at the earliest opportunity:
To do this, it is essential that you follow the instructions below. These provisions apply in the event that you return Goods to us because you say they are faulty:
You must tell us by email message to (email@example.com) or by letter to our land address at the top of this page you that you would like to return Goods, specifying exactly what Goods and when purchased, giving full details of the defect or other reason for return. We will then issue a returns note. If you send Goods to us without a returns note, we may not be able to identify sufficient details to enable us to attend to your complaint.
The Goods must be returned to us as soon as any defect is discovered.
So far as possible, Goods should be returned: