Sempatap Adhesive

As low as £27.36
In stock
SKU
Sempatap Adhesive
SEMPATAP ADHESIVE Use for installing SEMPATAP THERMAL AND SEMPAFLOOR. read more
Fast delivery available
Tested & verified products
50 years experience

For trade enquiries, please call us on 01372 743 334

We’re open 9:00am - 5:00pm Mon-Fri

SEMPATAP ADHESIVE Use for installing SEMPATAP THERMAL AND SEMPAFLOOR.
 
PREPARATION - Surfaces must be sound, smooth, dry and free from contaminants.  Very porous surfaces should be primed with one coat of SEMPATAP A PRIMER.
 
APPLICATION – Stir well before use.  Apply one liberal coat of SEMPATAP ADHESIVE by brush, roller or notched trowel.  Apply the SEMPATAP ADHESIVE to one metre wide of wall, ceiling or floor surface extending application 10 cms only.
 
Fix SEMPATAP THERMAL/SEMPAFLOOR in place in accordance with application instructions.  Smooth out, removing all air pockets, using SEMPATAP SPATULA.
 
Apply SEMPATAP ADHESIVE to the next one metre area and fix SEMPATAP/SEMPAFLOOR in place, continuing this method until entire area has been covered.
 
COVERAGE – Approximately 2.5 litres for each 5²m, depending on condition and absorbency of the surface.
 
WORKING TIME – Up to 60 minutes, depending on temperature, humidity and absorbency of the surface.  
 
STORAGE – unopened containers should be stored in dry, well ventilated conditions between 5°C and 30°C.  Protect from frost.
 
CLEANING – Brushes, rollers and trowels must be cleaned after use with water whilst the adhesive is still wet.
 
PRECAUTIONS – Do not apply loads or move furniture on the floor until the adhesive has fully set.
 
HEALTH & SAFETY ADVICE 
 
Avoid prolonged contact with skin, use barrier cream or gloves for the hands.  In case of contact with eyes, mouth or nose, wash with water and obtain medical attention.  If spilled, remove and dispose of in accordance with national and local regulations for waste materials.

SEMPATAP ADHESIVE APPLICATION INSTRUCTIONS

Stir well before use. Apply one liberal coat of SEMPATAP ADHESIVE by brush, roller or notched trowel eg. Apply the SEMPATAP ADHESIVE to one metre wide of wall, ceiling or floor surface extending application 10 cms only.

Fix SEMPATAP THERMAL/SEMPAFLOOR in place in accordance with application instructions. Smooth out, removing all air pockets, using SEMPATAP SPATULA. Apply SEMPATAP ADHESIVE to the next one metre area and fix SEMPATAP THERMAL/SEMPAFLOOR in place, continuing this method until entire area has been covered.

COVERAGE – Approximately 2.5 litres for each 5²m, depending on condition and absorbency of the surface.

WORKING TIME – Up to 60 minutes, depending on temperature, humidity and absorbency of the surface.

STORAGE – unopened containers should be stored in dry, well ventilated conditions between 5°C and 30°C. Protect from frost.

CLEANING – Brushes, rollers and trowels must be cleaned after use with water whilst the adhesive is still wet.

PRECAUTIONS – Do not apply loads or move furniture on the floor until the adhesive has fully set.

HEALTH & SAFETY ADVICE

Obtain the relevant Material Safety Data Sheets and follow the advice given.
Ensure adequate fresh air ventilation during and after use.
Avoid prolonged contact with skin, use barrier cream or gloves for the hands. In case of contact with eyes, mouth or nose, wash with water and obtain medical attention. If spilled, remove and dispose of in accordance with national and local regulations for waste materials.

Help

If you require help or assistance with your order including for special colours in Biocheck Matt or Silk Emulsions and Biocheck Allweather please contact our sales office which is open Monday to Friday 9.00 am – 5.00 pm

Telephone: 01372 743334

Email: info@mgcltd.co.uk

Fax: 01372 720856

Address;

Mould Growth Consultants Limited

Unit A3

Longmead Business Centre

Blenheim Road

Epsom

Surrey

KT19 9QQ

Delivery

We will aim to process your order for despatch to you between 1-5 working days of confirming acceptance of your order. Consequently, even if you cancel your order shortly after placing it, it is possible that we may be unable to prevent goods you have ordered being despatched to you and you may then need to return them to us at your cost.

When you order your Goods, we will wherever possible, give you an indication of the day of delivery, normally 2-5 working days after confirming acceptance of your order.

Deliveries will be made by post/a carrier instructed by us to the address stipulated in your order. You must ensure that someone is present to accept delivery.

While a delivery date will be prearranged with you, please remember that it is generally not possible to contact the delivery driver once he has left the depot. As a signature is required on delivery, if you will not be at home to take the delivery, a signed note instructing the driver where to leave the goods is acceptable. Otherwise a re-delivery charge will be incurred.

 

Cancellation of Order

If you bought the Goods as a Consumer, you may cancel your order at any time before we despatch your order or before the expiry of 7 working days from the date you receive your order, not including the day you received it.

As required by the Distance Selling Regulations, details of our after-sales service and guarantees, if any, are given on our website.

If you cancel before we have sent the Goods, we will refund to you the price of the Goods and the cost of delivery, if any.

 

Goods returned

Our most important task is to ensure your absolute satisfaction. We will always strive to reach that target. However, we acknowledge that mistakes are made occasionally. This paragraph covers that possibility. If you are not wholly satisfied with the product, please tell us at the earliest opportunity:

  • Exactly what the fault is
  • The date, if relevant, when the fault became apparent
  • When and how you discovered the fault
  • How the fault affected your use of the Goods

To do this, it is essential that you follow the instructions below. These provisions apply in the event that you return Goods to us because you say they are faulty:

You must tell us by email message to (info@mgcltd.co.uk) or by letter to our land address at the top of this page you that you would like to return Goods, specifying exactly what Goods and when purchased, giving full details of the defect or other reason for return. We will then issue a returns note. If you send Goods to us without a returns note, we may not be able to identify sufficient details to enable us to attend to your complaint.

The Goods must be returned to us as soon as any defect is discovered.

So far as possible, Goods should be returned:

  • With both Goods and all packaging, as far as possible, in their original condition
  • Securely wrapped
  • Including our delivery slip
  • At your risk and cost.

Please see our full terms and conditions on the website