The RLT PACK is designed for moderate to severe outbreaks of mould. The RLT PACK is a compact treatment for extensive mould contaminating 3 or 4 rooms in a house or flat. It can be used by homeowners or contractors.
Each pack contains 1 litre of RLT BACTDET 05, 4 x MGC FUNGICIDAL ADDITIVES, RLT CLEARMOULD SPRAY, CLEANING CLOTH and PAIR OF GLOVES. Sufficient materials to treat 45-50 square metres of mould infected surfaces.
There is an instruction leaflet inside the box as well as instructions on each of the bottles.
RLT BACTDET 05, RLT HALOPHEN, MGC MGC FUNGICIDAL ADDITIVES and the RLT CLEAR MOULD SPRAY are approved under COPR 1986 (as amended) by the Health & Safety Executive (HSE) for both amateur and professional use.This Pack contains the following:
1 x 1 litre RLT BACTDET 05
1 x 1 litre RLT HALOPHEN
1 x RLT CLEARMOULD SPRAY
4 x MGC FUNGICIDAL ADDITIVES 50 mls.
1 x CLEANING CLOTH
1 x PAIR OF GLOVES
For instructions on how to apply, see our videos here
STEP BY STEP APPLICATION INSTRUCTIONS
Also watch the Mould Eradiction Kit video for a detailed application demonstration.
For dealing with MOULD GROWTH on walls, ceilings, window reveals, window frames, skirting boards, doors, etc.
STAGE 1: Use the RLT BACTDET 05 to kill and remove surface mould before preparation work.
Areas to be treated: Treat the whole area where mould can be seen. Extend the treatment one metre (3ft) beyond the infected area in all directions on the walls or ceilings. Carpets should be lifted, especially fitted carpets and the flooring cleaned using the RLT BACTDET 05 Solution.
Directions: Put 1 measure, by volume, of RLT BACTDET 05 into 4 measures, by volume, of warm water. Take a brush or clean cloth and wash off the mould.
When the solution becomes dirty, make up a fresh one. If the cloth becomes dirty, throw away and use a clean one.
Wallpaper surfaces must be washed prior to stripping. After wallpaper has been removed wash infected area again. All wallpaper removed should be bagged, sealed and taken from the premises immediately. Allow surface to dry before proceeding.
PREPARATION: Prepare surfaces, scrape off all loose or flaking paint and rub down. Previously painted surfaces must be etched using sandpaper or similar, before proceeding to Stage 2.
STAGE 2: Use the RLT HALOPHEN to sterilise and protect the surface.
Areas to be treated: Treat all areas of wall and ceiling surfaces where
RLT BACTDET 05 has been used.
Directions: Add 1 measure of RLT HALOPHEN to 4 measures of water, both by volume. When surfaces are dry, brush RLT HALOPHEN Solution well into the surface. If the mould was very bad apply a second coat. Allow surface to dry before decorating.
STAGE 3: MGC FUNGICIDAL ADDITIVES are specially formulated to protect the decoration from mould attack. They can be incorporated into Emulsion Paint, Primers, Undercoats and Gloss Paint, plus Wallpaper Paste, Size, Textured Paints and Grout.
Directions: Add the contents of one MGC FUNGICIDAL ADDITIVE to each 2½ litres of Emulsion Paint, Wallpaper Paste or Size.
Add the contents of one MGC FUNGICIDAL ADDITIVE to each 5 litres of Primer, Undercoat or Gloss Finish.
Thoroughly stir materials after adding contents of MGC FUNGICIDAL ADDITIVE.
Alternatively use BIOCHECK EMULSION - available in Matt or Silk Finish - on walls and ceilings and BIOCHECK WATER-BASED GLOSS on woodwork, metalwork, etc., the decorative finishes specially formulated to resist mould. Full details on both these products are available on request.
STAGE4: Use RLT CLEARMOULD SPRAY to treat Furniture, Textiles and Leathergoods.
WARDROBES AND OTHER FURNITURE - spray RLT CLEARMOULD SPRAY in wardrobes, cupboards and drawers, paying particular attention to corners and shelves. Wipe all areas with a clean damp cloth.
LARDERS - remove all food and treat as for wardrobes.
TEXTILES, CARPETS AND UPHOLSTERY - vacuum articles to be treated. Spray all areas thoroughly with RLT CLEARMOULD SPRAY. Treat both sides of carpets and the floor under carpets.
SHOES AND LEATHER GOODS - slightly dampen a clean cloth. Spray cloth with RLT CLEARMOULD SPRAY and wipe inside and outside of affected shoes and leather goods. Spray inside of shoes and allow to dry.
If you require help or assistance with your order including for special colours in Biocheck Matt or Silk Emulsions and Biocheck Allweather please contact our sales office which is open Monday to Friday 9.00 am – 5.00 pm
Telephone: 01372 743334
Fax: 01372 720856
Mould Growth Consultants Limited
Longmead Business Centre
We will aim to process your order for despatch to you between 1-5 working days of confirming acceptance of your order. Consequently, even if you cancel your order shortly after placing it, it is possible that we may be unable to prevent goods you have ordered being despatched to you and you may then need to return them to us at your cost.
When you order your Goods, we will wherever possible, give you an indication of the day of delivery, normally 2-5 working days after confirming acceptance of your order.
Deliveries will be made by post/a carrier instructed by us to the address stipulated in your order. You must ensure that someone is present to accept delivery.
While a delivery date will be prearranged with you, please remember that it is generally not possible to contact the delivery driver once he has left the depot. As a signature is required on delivery, if you will not be at home to take the delivery, a signed note instructing the driver where to leave the goods is acceptable. Otherwise a re-delivery charge will be incurred.
Cancellation of Order
If you bought the Goods as a Consumer, you may cancel your order at any time before we despatch your order or before the expiry of 7 working days from the date you receive your order, not including the day you received it.
As required by the Distance Selling Regulations, details of our after-sales service and guarantees, if any, are given on our website.
If you cancel before we have sent the Goods, we will refund to you the price of the Goods and the cost of delivery, if any.
Our most important task is to ensure your absolute satisfaction. We will always strive to reach that target. However, we acknowledge that mistakes are made occasionally. This paragraph covers that possibility. If you are not wholly satisfied with the product, please tell us at the earliest opportunity:
To do this, it is essential that you follow the instructions below. These provisions apply in the event that you return Goods to us because you say they are faulty:
You must tell us by email message to (firstname.lastname@example.org) or by letter to our land address at the top of this page you that you would like to return Goods, specifying exactly what Goods and when purchased, giving full details of the defect or other reason for return. We will then issue a returns note. If you send Goods to us without a returns note, we may not be able to identify sufficient details to enable us to attend to your complaint.
The Goods must be returned to us as soon as any defect is discovered.
So far as possible, Goods should be returned: