Trade

Professional Use

Mould Growth Consultants black mould treatments have been successfully used throughout the UK by Local Authorities, Housing Associations, private landlords and homeowners for over 45 years in homes affected by condensation damp and mould.

All our fungicidal treatments are approved under the Control of Pesticides Regulations 1986 (as amended) C.O.P.R. by the Health and Safety Executive. The products are classed as amateur mould treatments and/or professional mould treatments.

The effectiveness of MGC treatments has been proven from four and a half decades of successful application in social and private sector housing and also shown by tests carried out by the BRE, PRA and several other independent laboratories

Bactdet D 05

BACTDET D 05 5LIT

MGC Professional System Bactdet D 05 – This solution is for cleaning and sterilising the surface.

Wash down mould infected surfaces with BACTDET D 05 diluted with 4 parts of warm water using a brush, sponge or cloth. Extend treatment one metre in all directions beyond all visible signs of infection. When the solution becomes dirty make up a fresh one. Coverage must not exceed 10 square metres per diluted litre. Allow to dry.

Pack size: 5 litres

 

 

 

 

 

For a Specification to Eradicate

Severe Mould Click Here SEVERE MOULD SPEC

 

Halophane Bonding Solution

HALOPHANE BONDING 5LIT

MGC Professional System Halophane Bonding Solution – This solution penetrates the substrate, kills the roots of the mould and forms a fungicidal barrier.

Apply by brush 1 neat coat of HALOPHANE BONDING SOLUTION extending the treatment at least one metre beyond the areas of infection in all directions and allow to dry. Coverage must not exceed 10 square metres per litre. DO NOT DILUTE.

Brush HALOPHANE BONDING SOLUTION well in for maximum penetration. Pay special attention to corners and junctions. Apply a second coat and allow to dry

 

 

 

 

For a Specification to Eradicate

Severe Mould Click Here SEVERE MOULD SPEC

Biocheck Fungicidal Emulsion Paint

BIOCHECK EMULSION 5LIT

Biocheck Matt and Silk Fungicidal Emulsion designed specifically to provide long term protection against mould attack in severe condensation situations. Developed from years of experience resulting in a high-quality emulsion for successfully resolving mould problems. Tested by the BRE and proven to be completely resistant to colonisation and growth of mould. Available in 10 pastel shades and white.

Pack size and colours:

Biocheck Fungicidal Emulsion Paint is available in:

 

2.5 litres and 5 litres in White, Matt and Silk Finish.

2.5 litres and 5 litres in Magnolia, Matt and Silk Finish.

5 litres are also available in 10 pastel shades: – Rose White, Apple White, Autumn White, Magnolia, Pale Green, Pale Blue, Buttermilk, China Blue, Pink, Sugared Almond and White in both Matt and Silk Finish.

RLT Pack

RLT PACK CROP COM

The RLT Pack is used for treating medium to severe mould contamination. The system comprises of RLT Bactdet 05 which is used to kill and clean the mould off the surface of the walls and ceilings, RLT Halophen which penetrates into the substrate to kill the roots and form a fungicidal barrier. The area can then be decorated with either MGC Fungicidal Additives incorporated into the new emulsion or wallpaper paste or Biocheck Fungicidal Emulsion. Contains sufficient materials to treat 45-50m² of mould

Contents: This Pack contains the following:

1   x     1 litre RLT BACTDET 05

1   x     1 litre RLT HALOPHEN

1   x     RLT CLEARMOULD SPRAY

4   x     MGC FUNGICIDAL ADDITIVES 50 mls.

1   x     CLEANING CLOTH

1   x     PAIR OF GLOVES

INSTRUCTION LEAFLET

Mould Eradication Kit

MOULD ERADICATION KIT CROP

The Mould Eradication Kit is a compact treatment with everything required to deal with small outbreaks of black mould. It contains RLT Bactdet 05, RLT Halophen, MGC Fungicidal Additives, mixing bucket, sponge, gloves and brush, there is sufficient materials for 10-12m² of mould. MEK’s are approved under C.O.P.R. 1986 (as amended) by the Health and Safety Executive for both amateur and professional use and have been extensively used by Local Authorities and Housing Associations for over 25 years for solving mould problems. Contains sufficient materials to treat 10-12m² of mould.

Contents: This Kit contains the following:

1   x     RLT BACTDET 05 200 mls.

1   x     RLT HALOPHEN 200 mls.

2   x     MGC FUNGICIDAL ADDITIVES 50 mls.

1   x     PAIR OF GLOVES

1   x     SAFETY GOGGLES

1   x     PAINT BRUSH

1   x     CLEANING SPONGE

1   x     MIXING BUCKET

INSTRUCTION LEAFLET

 BB Pack

B B PACK CRIOP ROT & COM

2 part mould treatment pack for outbreaks of mould, including black mould. Contains RLT Bactdet 05 fungicidal wash and Biocheck fungicidal mould killing paint.

Biocheck BB Pack will remove mould and stop it returning, particularly effective in high condensation risk areas such as kitchens and bathrooms.

Easy to follow instructions. Available in Matt or Silk. Magnolia or White only. Sufficient to treat 10-12 m² – 2 coats

Contents:

This Pack contains the following:

1   x     RLT BACTDET 05 200 mls.

1   x     Biocheck Emulsion Paint 2.5lit

In Matt or Silk Finish as required

 

Biocheck Water Based Gloss

WATER BASED GLOSS ENH & COM

Biocheck Water based Gloss – three products in one, primer, undercoat and topcoat, low odour water based gloss which touch dries in 1-2 hours in good drying conditions. Can be used on internal surfaces as well as external. Resistant to internal mould and external moss, lichen and algae. Do not use outside if the temperature is below 10 degrees Celsius and falling

Pack size: 2.5 litre

 

 

 

 

 

 

MGC Fungicidal Additive

FUNGICIDAL ADDITIVES X12

Fungicidal Additives formulated to protect the decoration from mould attack. Can be incorporated into emulsion paint, gloss paint, primers, undercoats, size, wallpaper paste and grout.

Add one Fungicidal Additive to 2½ litres of emulsion paint, wallpaper paste or size.

Add one Fungicidal Additive to 5 litres of primer, undercoat or gloss paint

Thoroughly stir material after Fungicidal Additive

Pack size: box contains 12 x 50 mls units

 

RLT Bactdet 05

RLT BACDET 1LIT

RLT Bactdet 05 Sterilising solution for killing and removing mould

Dilute solution 1:4 with warm water. Wash down using a brush, cloth or sponge and change the solution when it becomes dirty. The coverage you will achieve is 50 sq. metres per litre.

Pack size: 1 litre

 

 

 

 

 

 

 

 

RLT Halophen

RLT HALOPHEN 1LIT

RLT Halophen Water based fungicidal barrier to be applied after RLT Bactdet 05.

Dilute solution 1:4 with clean water. Apply by brush to the affected area extending to a metre beyond all visible signs. The coverage you will achieve is 50 sq. metres per litre

Pack size: 1 litre

 

 

 

 

 

 

 

RLT Clearmould Spray

RLT CLEARMOULD SPRAY

For treating mould and mildew on carpets, leather goods and furnishings.

Pack size: 235 mls

 

 

 

 

 

 

 

 

 

 

MGC Mould Resistant Sealant

MGC MOULD RESIS SEALANT

One part white flexible fast curing mould resistant sealant for kitchens and bathrooms

Pack size: 310 cc

Back To Top

 

Accreditations